錫鷗牌“鈦合金鋼領”

錫鷗的牌鈦合金鋼領

采用高級鈦合金材料研制而成。內部晶粒結構緊密、細致。熱處理性能更穩定，變形量極小。

優良的使用性能：

·表面采用高科技復合鍍工藝，鍍上極薄一層具有自潤滑作用的耐磨物質，并滲入鋼領表面。上車走熟期極短。

·鋼領與鋼絲圈接觸面屬于異相摩擦，因此，不易發生粘連磨損，避免鋼領跑道發生早期衰退現象，壽命與傳統光面鋼領相比可延長至5--7倍。

·卓越的表面處理工藝，使鋼領表面幾乎永不生銹。

·錫鷗牌鈦合金鋼領材質極為耐磨，因此，磨損量極微。在翻改紡紗品種時（指中、細支紗）不需拆下，必要時可在車上用柔軟織物（或回絲）對跑道進行擦拭清理一次，并換上相應重量的（最好是同型號的）鋼絲圈即可進行試紡。

·本鋼領適合紡織任何纖維及各種支紗，對鋼絲圈的選配無特殊要求，能使紡紗斷頭降低，毛羽減少。質量長期穩定在較好的水平上。

·該鋼領質量差異小，為減少細紗錠差打下良好的基礎。

The ring is made of high-grade Ti alloy with compact structure of the crystal grain, which allows stable heat treatment performance and little deflection.
Excellent performance:
The surface of the ring id coated with a paper-thin layer of selt-lubrication wearable material by high-etcg plating process, which allows short period to smooth running.
Out-of-phase friction between the ring and the ring trabeler allows long service life resulting from the reduction of the early rust which the wear and tear causes.Its service life is extended 5 to 7 times than that of the traditional ring.]
Advanced surface treatment process allows stainless.
XiOu Ti alloy ring with featrues of approved wear resistance makes it unnecessary to change ring when yarn counts changed.Clean the ring inside flange with soft fabric or cotton waste when it is necessary, and the replace the corresponding ring traveler, the dame type is recommended.
The ring is suitable for any fiber and all counts yarns without any special requirement for the selection of the ring traveler.Low end breakage and little hairines allow stable good quality.
High quality ring is a help to reduce the spindle discrepancy of the ring frame.